IBS Electronics

Invicta Electronics

Invicta Electronics designs and manufactures magnetic components including transformers. Power, compact, PoE, current sense, gate drive, ultrasonic sensing, isolation, data, capacitor charging and CCFL transformers are offered by the company. Invicta Electronics' R&D team specialize in High & Low Frequency topology, encapsulated and High-Tech transformers. Invicta Electronics manufactures range of standard and complex high-tech designs for demanding industries. With most of the manufacturing processes under one roof Invicta Electronics has the capacity and flexibility to manufacture any design on the fly.

A transformer is an electric device that transfers electrical energy between two or more circuits through electromagnetic induction. Transformers can be used to increase or decrease voltages to a suitable level depending on design requirements. A transformer is one of those electrical devices which, by the standards of electromagnetic enlistment, moves electrical energy starting with one electric circuit then onto the next without changing the recurrence. With an air conditioning transformer, the energy move, as a rule, happens with a difference in voltage and current.

Products

Transformers

High Frequency Transformer

Power / Gate Drive / PoE / Isolation / Current Sense / Custom: push the boundaries of high-power, high-frequency power conversion, offering custom solutions which achieve increased efficiencies when compared to conventional transformer designs.

Linear Magnetics

Class II / Power / Isolation / Low Profile / Toroidal Linear Magnetics is a core market for Signal Transformer, providing innovative, application specific solutions to the electric/electronic industry. Chassis and DIN Rail parts are designed to support multiple connection schemes with offerings that include Touch Safe, Quick Connect and Solder Lug Terminals as well as Wire Leads.

Planar Transformer

PCB / Copper Plate: Planar transformers are devices used to exact standards with precise electrical characteristics such as capacitance, output, and aspect ratio.

LAN TRANSFORMER

2.5G / 5G / 10G / T1E1 / 10 / 100 / 1000 / Chip Lan transformer: The primary purpose is isolation. Typically they are also used as part of the signal conditioning, turning a pair of single-ended drives into a differential signal on transmit and establishing the correct common mode voltage for the receiver on receive.

Inductors

High Current Flat Wire Inductor:High Current Power Inductor / Three phase Inductor / Air Coil

COMMON MODE CHOKE : Common Mode Line Filter / Common Mode Power Choke / Three Phase Common Mode Choke

Surface mount inductors: Unshielded / Shielded / Ceramic Inductors / Molded Inductors / Ferrite Beads / Common Mode Filters

Inductors & Common Mode Filters

1. Unshielded Surface Mount Inductors:

   • These are basic surface mount inductors without any shielding.
   • They are commonly used for general purpose applications where electromagnetic interference (EMI) is not a significant concern.
   • Unshielded inductors are cost-effective and widely available.

2. Shielded Surface Mount Inductors:

   • Shielded surface mount inductors have a magnetic shield surrounding the coil.
   • This shield helps to contain the magnetic field and reduce interference with nearby components.
   • Shielded inductors are used in applications where EMI suppression is necessary.

3. Ceramic Inductors:

   • Ceramic chip inductors are made using ceramic material and are suitable for high-frequency applications.
   • They offer high Q factor (quality factor) and are used in RF (radio frequency) circuits, filters, and impedance matching networks.

4. Molded Inductors:

   • Molded inductors have their coils encapsulated in a protective material, often epoxy resin.
   • This encapsulation provides mechanical stability and protection against environmental factors.
   • Molded inductors are used in applications where robustness is important.

5. Ferrite Beads:

   • Ferrite beads are passive electronic components that suppress high-frequency noise in electronic circuits.
   • They are made of ferrite material and act as a high-impedance element at higher frequencies, effectively filtering out noise.
   • Ferrite beads are commonly used on signal lines and power lines to reduce EMI.

6. Common Mode Filters:

   • Common mode filters (or chokes) are used to suppress common mode electromagnetic interference.
   • They have two windings that carry current in opposite directions, effectively canceling out common mode noise.
   • Common mode filters are crucial in applications where noise on signal lines needs to be minimized, such as in data transmission and power supply circuits.

IBS Electronics is Invicta authorized distributor. We distribute a wide range of types of transformers being used today such as Power Transformers, Auto Transformers, Distribution Transformers, Instrument Transformers, Isolation Transformers, Potential Transformers, Current Transformers and Transformers. We can assist you of power transformers, pulse and current transformers, and transformer components for audio, telecom, RF and wireless applications and many more.